Avaya Definity SI - Release Packet-Control

release packet-control
Issue 4 May 2002
8-259555-233-123
release packet-control
This command activates the packet-control circuit pack, and reestablishes each
terminated point-to-point signaling link on this packet-control. It is the complement
to busyout packet-control, which deactivates packet control and destroys
terminated point-to-point signaling links.
Feature Interactions
High or Critical Reliability Systems disallow attempts to release the packet-control
that resides in the standby control complex.
When packet-controls in the active control complex are released from previous
busied-out states, connectivity across Packet Buses reestablish. ISDN-BRI
point-to-point signaling links reestablish with release packet-control.
Output
The following output example is a display of release packet-control 1A.
Field descriptions
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release
packet-
control
location simplex = location parameter not used.
Duplicated = packet control carrier
(1A or 1B)
Examples: release packet-control 1A
release packet-control 1B
init
inads
craft
simplex = cabinet
1, carrier A.
duplex = cabinet
1. (no default
carriers.)
see below
Port
Cabinet-Carrier where Packet-Control resides.
Maintenance Name
PKT-CTRL.
Alt. Name
Not applicable.
Result
Success status of a busied out object (PASS, ABORT, FAIL).
Error Code
System-generated description of a command failure.
release packet-control 1A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
1A PKT-CTRL PASS
Command successfully completed