Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-362 Issue 4 May 2002
status hardware-group
Summary information for the active or last hardware group test displays. This
display includes the number and percentage of tested maintenance objects, the
percentage of tests passed, failed, and aborted, the time elapsed since initiating
the hardware group test, the specific hardware group test command (see ‘‘test
hardware-group’’ command) initiated, and the state (active/canceled/complete) of
the hardware-group test.
Output
The following output example is a display of status hardware-group.
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status
hardware-group
print Report sent to printer.
Examples:
status hardware-group
status hardware-group print
init
inads
craft
cust
rcust
bcms
browse
none none
status hardware-group page 1 of 1
HARDWARE GROUP STATUS
Hardware Group Command State: active
Number of MOs Tested: 11070
Total Number of MOs to be Tested: 12300
Percent Complete: 90%
Elapsed Test Time (hr:min:sec): 0:15:30
Repetition Number: 1
Percentage of Tests Passed: 82%
Percentage of Tests Failed: 11%
Percentage of Tests Aborted: 7%
ENTERED HARDWARE GROUP COMMAND
Command: test hardware-group system
Test sequence: short
Test repetition: repeat 3
Output Options: failures
Hardware Options: SPE-interchange
To Next Page
Loading...
