status hardware-group
Issue 4 May 2002
8-363555-233-123
Field descriptions
Hardware Group
Command State
“active” = testing in progress, “canceled” = testing canceled,
“complete” = command completed; no testing occurring.
Number of MOs
Tested
Number of MOs in the specified group (refer to test
hardware-group command) that the hardware-group
command tests, including MOs that were tested or aborted due
to resource contention.
Total Number of
MOs to be Tested
Number of MOs in the group specified in the test
hardware-group command.
Percent Complete
Ratio of the completed MOs to the MOs to test in the command.
Elapsed Test
Time
It tracks completion time for the hardware-group command. If
a test cancels, then restarts, the time for the cancel period is
excluded. The time displays in HH:MM:SS format.
Repetition
Number
Number of completed iterations that correspond to the “repeat’
or ‘continuously’ option.
Percentage of
Tests Passed
Percentage of tests that passed.
Percentage of
Tests Failed
Percentage of tests that failed.
Percentage of
Tests Aborted
Percentage of aborted tests
Command
Hardware-group action objects and qualifiers.
Test sequence
Short or long.
Test repetition
Displays continuously or the keyword repeats with the entered
repeat value.
Output options
Selections that were chosen on the input form: auto-page,
background, or failures.
Hardware options
Selections that were chosen on the input form: all-ports, or
SPE-interchange.
To Next Page
Loading...
