CLSFY-BD (Call Classifier Circuit Pack)
Issue 4 May 2002
10-411 555-233-123
CLSFY-BD (Call Classifier Circuit
Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also Call Classifier Port (CLSFY-PT) Maintenance
documentation for related port information.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the carrier
where the circuit pack is located (for example, 01, 02, etc.).
Full Name of MO
CLSFY-BD MIN test board PCSS sh Call Classifier Circuit Pack
CLSFY-BD WRN test board PCSS sh Call Classifier Circuit Pack