Avaya Definity SI - Set Expansion-Link; Set Options

Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-286 Issue 4 May 2002
set expansion-link
The set expansion-link command sets the Expansion-Interface Link between:
■ the PPN and an EPN
■ two EPNs to a specific Interface Link circuit pack between PPN and EPN.
NOTE:
This command can corrupt any active data links between the PPN and an
EPN or between two EPNs.
set options
This command enables the technician (that is, remote user with INADS
permission) to select which types of maintenance categories report alarms
automatically and which types require customer call-in. Judicious use of this
command can reduce the number of ineffective alarms to the TSC. For effective
results, technicians should use the set options command default settings
specified in this section. Technicians should not change these settings. Special
circumstances (for example, special studies) may require temporary changes
under the guidance of Tiers 3 and 4.
NOTE:
Alarms do not upgrade.
Action/Object Qualifier Qualifier Description Logins Default
Feature
Interactions
set
expansion-link
link-
identifier
1A01, 1A02, 1B01, 1B02, 2A01, 2A02,
2B03, 3A01, 3A02, 3AB02, 3B03).
Examples:
set expansion-link 02a01
set expansion-link 3a02
init
inads
craft
none none
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
set options init
inads
see below none