release access-endpoint
Issue 4 May 2002
8-251555-233-123
release access-endpoint
This command removes all ports associated with the specified access endpoint
from a maintenance busy state. Periodic and scheduled tests subsequently
resume on the released ports. Maintenance completes background initialization
testing on the released ports. For details of the test sequence, refer to [3].
Output
The following example shows the output from the release access-endpoint
22502 command and assumes that the access endpoint ports for extension
22502 are in cabinet 1, carrier C, slot 11, circuit 1 to 6.
Field descriptions
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release
access-
endpoint
extension number associated with desired access
endpoint.
Examples:
release access-endpoint 25012
release access-endpoint 77868
init
inads
craft
nms
none none
Port
Port address (cabinet-carrier-slot-circuit) of released
maintenance.
Maintenance Name
The type of released maintenance object. (wideband access
point =WAE-PORT, single port access endpoint = TIE-DS1.
Alt. Name
Alternate way to identify maintenance objects. This field
contains the extension number of the access endpoint.
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release access-endpoint 22502 page 1 of 1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1101 WAE-PORT 22502 PASS
01C1102 WAE-PORT 22502 PASS
01C1103 WAE-PORT 22502 PASS
01C1104 WAE-PORT 22502 PASS
01C1105 WAE-PORT 22502 PASS
01C1106 WAE-PORT 22502 PASS
Command Successfully Completed
To Next Page
Loading...
