Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-268 Issue 4 May 2002
release trunk
The release trunk command removes specified trunk groups or trunk group
members from a maintenance busy state. Specifying the group number, releases
a single group member and the member number. Specifying the trunk group
number releases members in a trunk group.
Output
The following output example is a display of the release trunk 78/1 command.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release trunk group
member
Group number (1–99)
Member number (1–99)
Examples:
release trunk 78
release trunk 78/1
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit) of the released
maintenance object.
Maintenance
Name
The type of maintenance object that is being released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk xxx/yyy (xxx = trunk group, yyy = member)
private CO line P/xxx (xxx = private CO line group number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release trunk 78/1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1505 CO_TRK 78/01 PASS
Command successfully completed
To Next Page
Loading...
