Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-252 Issue 4 May 2002
release board
This command activates administered maintenance objects on the circuit pack at
specified locations. Tests are executed to ensure its usability.
Output
The following example shows the output from the release board 1c07 command
and assumes that the board in cabinet 1, carrier c, slot 7 is an analog board with
three ports administered.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release board location Physical location: PCsspp
Examples:
release board 01c11
release board 02c15
init
inads
craft
nms
none none
Port
Port address (cabinet-carrier-slot) of released maintenance
object.
Maintenance Name
The type of maintenance object that is being released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk xxx/yyy (xxx = trunk group, yyy = member)
private CO line P/xxx (xxx = private CO line group number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release board 01C07
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C07 ANL-BD PASS
01C0702 ANL-LINE PASS
01C0701 ANL-LINE 51001 PASS
01C0703 ANL-LINE PASS
Command successfully completed
To Next Page
Loading...
