display port
Issue 4 May 2002
8-107555-233-123
Field descriptions (page 2)
display port
This command displays the port location, the equipment connected to the port,
and the means by which the port can be identified (for example, an extension
number, the trunk group and member, and so on).
Name
Non-specific node name (up to 15 characters each) for CMS
nodes, DCS nodes, and so forth. Valid entries are
alpha-numeric and/or special characters for identification.
IP Address
IP address for the adjunct or switch. Enter 0 - 255 or leave
blank.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
display
port
location
print
schedule
Port address (PCSSpp)
Report sent to printer
Command is validated and
then a scheduling form
displays to schedule execution
of the command. The
command is then placed in the
command queue and is
executed at the specified time.
The information displayed by
the command is sent to the
system printer instead of the
screen.
1
Examples:
display port 1c0801
display port 1c0802 print
display port 2c1504
schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
browse
none none
To Next Page
Loading...
