Avaya Definity SI - Display Failed Ip-Network-Region; Display Firmware Download

display failed ip-network-region
Issue 4 May 2002
8-97555-233-123
display failed ip-network-region
The display failed network-region command will provide a list of the worst first 100
network regions with broken connectivity rank ordered by the worst to least worst.
The network regions are ordered from worst to best, for example:
■ 5:9 (i.e. Region 5 has 9 broken paths)
■ 4:5 (i.e. Region 4 has 5 broken paths)
■ 1:2 (i.e. Region 1 has 2 broken paths)
display firmware download
Whenever the processor resets and the system is restarted, whether initiated by a
technician command or by system software, information about the recovery is
stored. If the reset is escalated, only the reset that successfully completes is
recorded. Information about the reset may also be found in the Error Log. When a
reset 4 (reboot) occurs, the Error Log is saved on the Mass Storage System.
Records of the last 16 restarts are retained in the initcauses log in chronological
order. A power failure results in loss of all records in the initcauses log.
display failed-ip-network-region
WORST NETWORK REGIONS
Network Region:Number of Broken Paths
2:4 : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : : : : : :
: : : :
Command: