display node-names
Issue 4 May 2002
8-105555-233-123
Output
The following output example is for the display memory-configuration
command when executed on the G3V9si platform with SPE duplication:
For the Simplex SPE configuration, the column under “SPE_B” is blank.
display node-names
This command displays a list of the administered node names.
Output
The following example shows the output from display node-names.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
display
node-names
print
schedule
Example:
display node-names
init
inads
craft
none none
display memory-configuration SP_A
PROCESSOR MEMORY-CONFIGURATION
(M bytes)
SPE_A SPE_B
Flash ROM: 32 32
Total DRAM: 32 32
SIMM A: 16 16
SIMM B: 16 16
SIMM C: 0 0
Command successfully completed
To Next Page
Loading...
