Issue 4 May 2002 5-1555-233-123
5
Routine Maintenance Procedures
The following general purpose maintenance procedures may be used with other
repair strategies to clear system-alarmed and user-reported troubles.
Suppress Alarm Origination [y]
When logged in as “craft”, no alarms are reported to INADS. After logging off,
INADS automatically reactivates, and any unresolved alarms are reported to
INADS.
Also, when logged in as “craft,” an automatic logoff of the terminal occurs after 30
minutes of non-use. At that time, any unresolved alarms are reported to INADS. If
you are logged in as “craft” at 2 different terminals, the logoff occurs when the
second terminal remains unused for 30 minutes.
NOTE:
The test inads-link command functions even if INADS Alarm Origination is
overridden.
To Next Page
Loading...
