Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-254 Issue 4 May 2002
release data-module
This command activates the specified data module (or data channel). Hardware
tests are executed to verify that the equipment is functioning.
Output
The following example shows the output from release data-module 300.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release
data-module
extension Extension number associated with
desired data module or data channel.
Examples:
release data-module 310
init
inads
craft
cust
nms
none none
Port
Port address (cabinet-carrier-slot-circuit) of the maintenance object
that is busied out or released, or the number of the data channel.
Maintenance
Name
The type of maintenance object that is being busied out or released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk xxx/yyy (xxx = trunk group, yyy = member)
private CO line P/xxx (xxx = private CO line group number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release data-module 310
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1103 DIG-LINE PASS
Command successfully completed
To Next Page
Loading...
