status link n
Issue 4 May 2002
8-373555-233-123
status link n
(csi, si, r models with C-LAN circuit pack - Ethernet connection)
This command displays:
■ static information about the link
■ the data extension and port used, connect speed, and protocol information
■ a counter of CHAP failures for PPP links
■ time information for PPP and Ethernet links (includes the time of the last
reset, the last hour start time, and end time for the error counter statistics).
■ the type and number of active applications
The same information that is displayed by the status link command can also be
invoked with:
■ status pgate-port for PGATE links
■ status clan-port or netstat link n for C-LAN links.
Output
The following example shows page 1 of the output from the status link n
command (si w/ TN794 Net Packet/Packet Interface circuit pack).
Link/Port Status form (page 1)
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status link n Number of the administered link.
Example:
status link 1
init
inads
craft
none none
status link 1 Page 1 of 3
LINK/PORT STATUS
Link Number: 1
Link Status: connected
Link Type: ethernet
Link Name: ethernet on link 1
Service Port Location: 01A0917
Service Port Data Extension: 2991
Service State: in-service/idle
Node Name: ber1
Source IP Address: 192.168.10.11
Enabled? yes
Maintenance Busy? no
Active Channels: 0
To Next Page
Loading...
