Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-408 Issue 4 May 2002
status tti
status tti [print]
Use status tti to see the if the TTI background maintenance task is active. If the
TTI background maintenance task is active, the screen shows if TTI ports are
being generated or removed, the number of TTI-supported boards that have been
processed, and the number of TTI-supported boards that have not yet been
processed. The screen also shows the elapsed time since the background
maintenance task started.
To activate the TTI background maintenance task, enter y in the TTI field on the
Feature-Related System-Parameters screen.
Use
status psa to see the same screen. It shows that the status of PSA is
dependent on the state of TTI.
Output
The following example shows the output for status tti and status psa.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status tti
status psa
print Report sent to the printer
Examples:
status tti
status tti print
init
inads
craft
cust
nms
browse
none TTI background
maintenance task is
activated by enabling the
TTI system parameter on
the System-parameters
Features screen.
status tti
status psa
TTI/PSA STATUS
TTI Background Task State: completed - all ports translated
TTI State: voice
# of Boards Completed: 30
# of Boards Left to Process: 0
Percent Complete: 100
Elapsed Time since Task Started: 0 :0 :1
NOTE: TTI state must be ‘voice’, TTI task state ‘completed’ and PSA
customer-option enabled, for PSA to operate properly
To Next Page
Loading...
