clear link
Issue 4 May 2002
A-31 555-233-123
If the test call has already completed, the following message appears:
Test Call already terminated
If, during the execution of a command, a resource problem occurs that requires
the user to restart the command, this message displays:
Command resources busy; Press CANCEL to clear, and then resubmit
If all available maintenance resources are in use, this message displays:
All maintenance resources busy; try again later
Output
If the clear isdn-testcall command is successful, this message displays:
Command successfully completed
If the clear isdn-testcall command is unsuccessful, this message displays:
Error encountered, can’t complete request
clear link
Help Messages
If the system technician presses HELP after entering “clear link,” the following
message appears:
Enter 1 character link number
Error Messages
If the link identifier is not within the valid range, the following error message
appears:
Link out of range, please press HELP
If the link is not administered, the following error message appears:
Link not administered or not enabled
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
To Next Page
Loading...
