set time
Issue 4 May 2002
A-89 555-233-123
set time
Help Messages
If the system technician presses HELP after entering “set time,” the following
message appears:
Entry is not required
Error Messages
If the system encounters an error in getting the current time of day, then the
following message appears:
Error encountered, cannot complete request
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
Field Help
Following are the help messages that the system technician will see upon tabbing
to the specified field and pressing the
HELP key.
Day of the Week: A list of the days of the week will be presented on the bottom line. The help
is longer than 80 characters, consequently, the "(MORE)" message will
appear. In order to get the continuation of the list, the system technician
needs to type another help key. The list of key words is: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday, Sunday.
Day of the Month: "Enter current day 1-31."
Month: A list of the months of the year will be presented on the bottom line. The help
is longer than 80 characters, consequently, the “(MORE)” message will
appear. In order to get the continuation of the list, the system technician
needs to select the
HELP key. The list of key words is: January, February,
March, April, May, June, July, August, September, October, November,
December.
Year: "Enter current year"
To Next Page
Loading...
