Maintenance Object Repair Procedures
555-233-123
10-1736 Issue 4 May 2002
TIE-BD (Tie Trunk Circuit Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also TIE-TRK (Tie Trunk).
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the
carrier where the circuit pack is located (for example, 01, 02, ..., etc.).
Full Name of MO
TIE-BD MIN test board PCSS sh Tie Trunk Circuit Pack
TIE-BD WRN test board PCSS sh Tie Trunk Circuit Pack
To Next Page
Loading...
