enable synchronization-switch
Issue 4 May 2002
8-133555-233-123
enable synchronization-switch
This command re-enables automatic clock switching or returns the maintenance
subsystem back to the normal state. The synchronization subsystem consists of
the TDM bus clock, DS1 trunk board, and SPE-resident maintenance and
administration software and provides error free digital communication between
the switch and other PBXs, COs, or customer-premise equipment (CPE).
Action/
Object Qualifiers
Qualifier
Description Logins Defaults
Feature
Interactions
enable
suspend-
alm- orig
board/port
location
off-board-o
nly
expires-in-
hrs
Physical location of
the hardware
optional; if not
specified, both on-and
off-board alarms
suspended
No. of hours (1-72)
Examples:
enable
suspend-alm-orig
1B03 expires-in-hrs 3
enable
suspend-alm-orig
1B0701
expires-in-hrs 72
enable
suspend-alm-orig
1B07 off-board-only
expires-in-hrs 24
init
inads
craft
cust
rcust
Both on- and
off-board
alarms if the
off-board-
only keyword
is not specified
none
Action/Object Qualifier
Qualifier
Description Logins Defaults
Feature
Interactions
enable
synchronization-switch
init
inads
craft
none none
To Next Page
Loading...
