Avaya Definity SI - Test Failed Ip-Network-Region

test failed ip-network-region
Issue 4 May 2002
8-439555-233-123
The following example show the output for test environment 2, where cabinet 2
is an SCC cabinet.
test failed ip-network-region
test failed ip-network-region
The test failed ip-network-region command initiates a real-time ping test for
failed network-regions connections. The default is ALL failed ip-network regions.
Otherwise, test failed ip-network-region xxx, where xxx is in the range of 1-250
for r and 1-80 for si/csi/d)
Output
The following display shows a typical result for test failed ip-network-region.
test environment 2
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02 DC-POWER 5 PASS
02 EMG-XFER 124 PASS
02 EXT-DEV 120 PASS
02 RING-GEN 117 PASS
02 RING-GEN 118 PASS
Command Successfully Completed
test failed-ip-network-region
No failures for indicated region(s)