release tone-clock
Issue 4 May 2002
8-267555-233-123
release tone-clock
This command removes specified tone/clocks from maintenance busy states.
Output
The following output example is a display of the release tone-clock 1a command.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release
tone-clock
location Physical location: PCsspp
Examples:
release tone-clock c
init
inads
craft
1 (one) none
Port
The tone clock circuit pack maintenance object displays the
cabinet and carrier of the specified tone/clock board.
Maintenance Name
TONE-PT, TDM-CLK and TONE-BD
Alt. Name
Not applicable.
Result
Success status of a busied out object (PASS, ABORT,
FAIL)
Error Code
System-generated description of a command failure.
release tone-clock 1a
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01A TONE-PT PASS
01A TDM-CLK PASS
01A TONE-BD PASS
Command successfully completed
To Next Page
Loading...
