disable mst
Issue 4 May 2002
A-35 555-233-123
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
disable mst
Help Messages
If the user presses HELP after entering “disable mst,” the following message
displays:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
disable suspend-alm-orig
Help Messages
N is the maximum number of cabinets in the switch:
Enter board location:[cabinet(1-N)];
carrier(A-E);slot(0-20)
disable synchronization-switch
Help Messages
If the system technician presses help after entering “disable synchronization” the
following message appears:
Entry is not required
To Next Page
Loading...
