Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-294 Issue 4 May 2002
set tdm
This command establishes the TDM bus on a port network that houses control
channels and dedicated tones.
Feature Interactions
New calls go to time slots reserved for tones on the bus that have not other time
slots when:
■ Time slots on a specified bus are in use
■ Dedicated tone time slots are on the other half of the bus
A set command to buses that have calls on dedicated tone time slots drops these
calls.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
set tdm port
network
pn
number
bus
bus
override
specifies the Port Network number of the TDM
bus.
(“a” or “b”) specifies desired half of the TDM
bus. Configure each 512 time slot TDM bus as
two duplicate 256 time slot buses, allowing
duplication of control channels and dedicated
tone time slots.
A port network number (1 - 3) forces the setting
of a deactivated bus, or a bus whose dedicated
tone time slots are active.
Examples:
set tdm port-network 2 bus a
set tdm port-network 2 bus b override
init
inads
craft
none see below
To Next Page
Loading...
