Error Messages from Chapter 8: Maintenance
Commands
555-233-123
A-68 Issue 4 May 2002
release pms-link
Help Messages
If you press HELP after entering “release pms-link” the following message displays:
Entry is not required
If the command entered is in conflict with another currently executing command,
then a message displays showing the login ID of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, the following
message displays:
All maintenance resources busy; try again later
release port
Help Messages
If the system technician presses HELP after entering “release port,” the following
message appears:
Enter 7 character port number
Error Messages
If the format of the port location is incorrect, the following error message appears:
Port/Board invalid
If the EPN on which the port resides is unavailable, the following message
appears:
EPN is not available
If the board on which the port resides is not administered, the following error
message appears:
Port not assigned
To Next Page
Loading...
