Error Messages from Chapter 8: Maintenance
Commands
555-233-123
A-110 Issue 4 May 2002
Error Messages
If the format of the trunk identifier is incorrect, the following error message
appears:
Format invalid
If the trunk identifier is not in the valid range, the following error message appears:
Trunk or trunk group invalid
If the trunk group is not administered or has no members, the following message
appears:
Group not assigned, or group assigned
but with no member
If the trunk group member is not administered, the following message appears:
Group member not assigned
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
status tsc-administered
Help Messages
If the system technician presses HELP after entering “status tsc-administered” the
following message appears:
Enter sig group # (1-8) /tsc index # (1-64),
[’print’]
Error Messages
If the format for the specified signaling group or the signaling group and TSC is
incorrect, the following message appears:
Format invalid
If the specified signaling group number is out of range, the following message
appears:
Signaling group invalid
To Next Page
Loading...
