Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-70 Issue 4 May 2002
Field descriptions (page 10)
display communication-interface
The display communication-interface command must contain one of the three
qualifiers:
■ hop-channels: see ‘‘display communication-interface hop-channels’’
■ links: see ‘‘display communication-interface links’’
■ processor-interface: see ‘‘display communication-interface
processor-channel’’
Current System Information
Software Load The current software load on which the system is running.
Memory
Configuration
The system platform.
Offer Category The system’s offer category.
Last Translation Loaded Information
Software Load The software load translations saved before upgrade or reboot. Can
also be
unknown/no trans if no flash card is present. Also, if
load translations were upgraded from one prior to G3V4 load 71 or
early G3V5 loads,
unknown/no trans displays.
Memory
Configuration
The platform on which the translations were saved. Can also be
unknown if no flash card is present or translations made on old
load. This is important because platforms are not always
compatible.
Offer Category The offer category that was set when the last save translation was
done before upgrade or reboot. Can also be unknown if no flash
card is present or translations made on old load.
To Next Page
Loading...
