Maintenance Object Repair Procedures
555-233-123
10-418 Issue 4 May 2002
CO-BD (Central Office Trunk Circuit
Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also CO-TRK (CO Trunk) Maintenance
documentation for related trunk information.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier designation (for
example, A, B, C, D, or E); and SS is the address of the slot in the carrier where the circuit pack is
located (for example, 01, 02, etc.).
Full Name of MO
CO-BD MIN test board PCSS sh Central Office Trunk Circuit Pack
CO-BD WRN test board PCSS sh Central Office Trunk Circuit Pack
To Next Page
Loading...
