Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-272 Issue 4 May 2002
reset maintenance
This command resets technician-specified EPN maintenance circuit packs.
Specifying cabinets 2 or 3 resets EPN maintenance circuit packs in carrier “a” of
the specified cabinet.
This command also drops a SAT terminal session on the reset EPN maintenance
circuit pack. If this command runs from a EPN maintenance SAT terminal, reset
results do not display.
Output
The following output example is a display of reset maintenance 02a.
Field descriptions
Action/
Object Qualifier Qualifier Description Logins Default
Feature
Interactions
reset
maintenance
location Physical location of the EPN
maintenance circuit pack
(carrier number).
Examples:
reset maintenance 02
reset maintenance 2
reset maintenance 3a
init
inads
craft
none SAT is dropped before
reset results can display,
when command runs from
EPNSAT. Examine error
and alarm logs for “MAINT”
entries to determine reset
success.
Port
Port address (cabinet-carrier-slot) of the reset MO.
Maintenance Name
MAINT
Alt. Name
Not applicable. ()
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Test No.
306.
Error Code
System-generated description of a command failure.
reset maintenance 02A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A MAINT 306 PASS
Command successfully completed
To Next Page
Loading...
