Avaya Definity SI - Status Processor-Channel; Status Signaling-Group

Error Messages from Chapter 8: Maintenance
Commands
555-233-123
A-106 Issue 4 May 2002
If the EPN on which the PRI endpoint resides is not accessible, the following
message appears:
EPN is not available
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
status processor-channel
Help Messages
If the system technician presses HELP after entering “status processor-channel”,
the following message appears:
Enter a processor-channel number 1-64 [’print’]
Error Messages
If the technician-entered channel number is invalid, the following message
appears:
Channel invalid
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
status signaling-group
Help Messages
If the system technician presses HELP after entering “status signaling-group”, the
following appears:
Enter group identifier (1-8) [’print’]