Software Upgrade
Issue 4 May 2002
5-23555-233-123
7. Request is incompatible with currently running
operations — The storage system is in use. Try again later.
8. Card-Mem is not inserted in the system — Insert the translation
card.
9. Cannot access file; wrong type of Card-Mem is inserted
— The correct translation card for the desired operation has not been
inserted. Load the appropriate translation card.
10. File size exceeded — There is no more file space. Call your Avaya
representative.
11. Upgrade Memory Card inserted — The system upgrade translation
card may have been inserted instead of the translations card. Insert the
translation card.
12. Card-Mem is write-protected — The switch on the top side of the
translation card is incorrectly set. Move the switch to the down position.
13. Transmission problem; please try later — There is a problem
communicating with the announcement circuit pack. Check to see that the
announcement circuit pack has been correctly administered. Use the
change data <extension_number> command. Verify that the
announcement circuit pack is in the correct slot in the processor. If so, wait
and retry.
14. Command has been aborted; please try later — The command
was pre-empted. Try again later.
15. Saved copy of translations is unusable — The copy of the
translations on your translation card is faulty. Re-type save translation.
Software Upgrade
To perform a software upgrade, use the procedures described in Made Easy Tools
on your documentation CD.
To Next Page
Loading...
