Avaya Definity SI - ANL-BD (Analog Line Circuit Pack)

ANL-BD (Analog Line Circuit Pack)
Issue 4 May 2002
10-85 555-233-123
ANL-BD (Analog Line Circuit Pack)
Refer to “XXX-BD (Common Port Circuit Pack)” Maintenance documentation for
circuit pack level errors. See also “ANL-LINE (8-Port Analog Line), ANL-NE-L
(8-Port Neon Analog Line)”, and “ANL-16-L (16-Port Neon Analog Line)”
Maintenance documentation for related line information.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run
1
1 Where P is the port network number (1 for PPN and 2 or [G.1] 3 for EPN); C is the carrier designation
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, etc.).
Full Name of MO
ANL-BD MIN test board PCSS sh 8-Port Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 8-Port Analog Line Circuit Pack
ANL-BD MIN test board PCSS sh 8-Port Neon Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 8-Port Neon Analog Line Circuit Pack
ANL-BD MIN test board PCSS sh 16-Port Neon Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 16-Port Neon Analog Line Circuit Pack