Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-262 Issue 4 May 2002
release pri-endpoint
The release-PRI endpoint command removes PRI endpoint ports (B-channels)
associated with specified PRI endpoint from maintenance busy states. Periodic
and scheduled tests resume on released ports. The switch attempts to negotiate
with the far-end PRI terminal adapter activating PRI endpoint port (B-channel).
Maintenance does background initialization testing on released ports. For details
of the test sequence, refer to [3].
Output
The following output example is a display of the release pri-endpoint 22501
command. Assume that the PRI endpoint ports for extension 22501 are in cabinet
1, carrier B, slot 20, circuit 1 to 6.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release
pri-endpoint
extension extension number associated with
desired PRI endpoint.
init
inads
craft
nms
none none
Port
Port address (cabinet-carrier-slot-circuit) of released
maintenance object.
Maintenance
Name
PE-BCHL.
Alt. Name
Alternate way to identify maintenance objects. (PRI endpoint
extension)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release pri-endpoint 22501 page 1 of 1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01B2001 PE-BCHL 22501 PASS
01B2002 PE-BCHL 22501 PASS
01B2003 PE-BCHL 22501 PASS
01B2004 PE-BCHL 22501 PASS
01B2005 PE-BCHL 22501 PASS
01B2006 PE-BCHL 22501 PASS
Command Successfully Completed
To Next Page
Loading...
