test isdn-testcall
Issue 4 May 2002
A-129 555-233-123
test isdn-testcall
Help Messages
If the system technician presses HELP after entering “test isdn-testcall” the
following message appears:
Enter group #/member # [’minutes’ (1-120)],
[’schedule’]
Error Messages
If the specified format of the trunk location is incorrect, the following message
appears:
Format invalid
If the specified trunk group or member range is invalid, the following message
appears:
Trunk or trunk group invalid
If a trunk group and member is not specified, the following message appears:
Must specify group/member pair
If the specified trunk group is not administered or has no members administered,
the following message appears:
Group not assigned, or group assigned
but with no member
If the specified trunk group member is not administered, the following message
appears:
Group member not assigned
If the specified trunk is not an ISDN-PRI trunk, the following message appears:
Invalid non ISDN-PRI trunk specified
If no tests can be found for the associated MO, the following message appears:
No tests for this MO
If an ISDN-PRI test call has already been started, the following message appears:
There is a test call already in progress
If the software data cannot be sent to the SAT, the following message appears:
Error encountered, can’t complete request
To Next Page
Loading...
