NO-LIC (No License)
Issue 4 May 2002
10-1163555-233-123
NO-LIC (No License)
NOTE:
The No License maintenance object NO-LIC is a non-traditional MO. As a
result, there are no associated tests or commands that are executed in the
traditional manner.
Maintenance object NO-LIC works in concert with maintenance object LIC-ERR to
look for any errors/violations associated with the License File. Once a License File
error occurs, maintenance object LIC-ERR logs the error, raises an alarm, and
starts a timer that is associated with the error. When the timers threshold has
been exceeded, MO NO-LIC will cause call processing to be restricted. All call
origination will be restricted to outgoing emergency numbers, incoming calls will
be restricted to a Administration (Attendant Console) number.
The license file is loaded onto a switch during initialization of the switch software,
restore of translations, and periodically. After initialization, a query is made to a
software module called the License Server. This module reads the license file,
compares a serial number in the license file to a serial number in hardware,
compares the software version in the license with the running software version,
and if a match occurs, delivers permission to run to the DEFINITY software along
with a new feature mask. The feature mask controls revenue associated options.
MO Name (in
Alarm Log) Alarm Level Initial Command to Run Full Name of MO
NO-LIC- MAJOR None NO License
To Next Page
Loading...
