Avaya Definity SI - Status Cdr-Link

status cdr-link
Issue 4 May 2002
8-321555-233-123
status cdr-link
status cdr-link [print]
The status cdr-link command displays the status of the call detail recording (CDR)
links. If a link is down, the report includes the number of times the switch has tried
to re-establish the link.
The CDR link is the physical link that the SPE uses to send call detail records to
an output device such as a Call Detail Recording Utility (CDRU). CDR links use
System Ports which are described in the PDATA-PT section of Chapter 9. A
system may have up to two CDR links, a primary and a secondary. See PRI-CDR
in Chapter 9.
Output
The following information is displayed for both the Primary and Secondary CDR
links, whether or not both are used.
The following is an example of the fields contained on the output form.
Link State
The operational status of the link as follows:
up The link is established and is capable of supporting the
application. This is the normal operational state.
down The link is physically down.
extension not administered An extension number for
the output device has not been assigned on the CDR system
parameters form.
Number of
Retries
The number of times the switch has tried to set up the link.
Maintenance
Busy
Whether the link is busied out for testing.
status cdr-link SPE A
CDR LINK STATUS
Primary Secondary
Links state: up endpoint not administered
Maintenance Busy? no