Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-320 Issue 4 May 2002
Field descriptions
Table 8-11. Capacity of Memory Card
Card
Size User Customer File Names
8 Mb With Announcements translation/ announcements
16 Mb DEFINITY Wireless Business
Systems
translation/ announcements/firmware
48 Mb System Upgrade
Note: Post-G3V8
translation/ announcements/core_dump
48 Mb System Upgrade
Note: Post-G3V8
system_software
Status
“inserted” = valid memory card is in the memory card slot. The switch
can perform I/O operation to the memory card.
“no card” = no memory card is inserted or the inserted memory card
has a bad connection.
“unformatted”= the inserted memory card is unformatted or the switch
cannot recognized it.
Write-
Protection
“N/A”= For R9 and later, the memory card has no write protect switch
and no equivalent software mechanism.
Number of
Erase
Pulses
Number of pulses counted in the last erase operation on a Series 1
memory card. This field is blank for Series 2 memory cards due to
different algorithm of erase operations between the two series.
Translatio
n Storage
Space Used
“1”
Percentage of reserved storage space for storing translation files in the
memory card that saves translations to the memory card.
This percentage is valid for the specific memory card used in the most
recent save translation operation (from save translation or with
scheduled maintenance and save translation enabled). If the memory
card is replaced with another card, or if no save translation is
performed on the new memory card, the percentage does not indicate
the translation storage space used in the new card.
File Name
Each formatted memory card has reserved a fixed space in the card
for each file. The starting address and size of each reserved slot is
pre-determined according to the capacity of the memory card. The file
name as defined in Table “Capacity of Memory Card” is shown in this
field.
Data
Present
“y” when the file contains valid data. Otherwise, “n.”
Date Time
Date and time when the file was saved into the memory card. For the
Software Upgrade memory card, this field contains the system
software release number instead of the time stamp. The year
information is not available.
To Next Page
Loading...
