list measurements ds-1
Issue 4 May 2002
8-163555-233-123
list measurements ds-1
This command lists performance measurements of a DS-1 link indicating the
quality of the DS-1 physical interface between the system and a far end system.
The ds1 summary option provides a summary report while ds1 log provides a
detailed report.
NOTE:
The list measurements command has many more options than
documented here. Only those options dealing with DS1 board are
documented below.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
list
measure-
ments
log
summary
ds1_location
print
schedule
Detailed report generated
Summary report generated
The physical location of a DS1
circuit pack entered as
cabinet-carrier-slot.
Report sent to printer.
Schedule execution of the
command. The information
displayed by the command is
sent to the system printer
instead of the screen.
1
Examples:
list measurements ds1 log
2a18
list measurements ds1
summary 2a18 print
list measurements ds1
summary 2a18 schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
browse
nms
bcms
none none
To Next Page
Loading...
