Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-164 Issue 4 May 2002
Output
Field descriptions (list measurements
ds1-summary)
Counted Since
The start time and date when the measurement counters were
cleared or the DS1 circuit pack was administered.
Number of
Seconds Elapsed
Into Current
15-min Interval
The number of seconds from the beginning of the current
15-minute interval (0 - 900).
Total of Valid
15-min Intervals
in Past 24-hr
Period
The total number of 15-minute intervals in the past 24-hour
period that contain valid data (0 - 96).
Category
The four categories correspond to four measurement error
counters. The four categories are “1” “1” “1” and “”. The
meanings of each category follow:
■ Errored Seconds: the value of the errored seconds
counter for the specified 15-minute interval (0 - 900 or N/A if
data for the 15-minute interval is invalid).
■ Bursty Err Secs: the value of the bursty errored
seconds counter for the specified 15-minute interval (0 -
900 or N/A if data for the 15-minute interval is invalid).
■ Severely Err Secs: the value of the severely errored
seconds counter for the specified 15-minute interval(0 - 900
or N/A if data for the 15-minute interval is invalid).
■ Failed Seconds: the value of the failed seconds
counter for the specified 15-minute interval (0 - 900 or N/A if
data for the 15-minute interval is invalid).
list measurements ds1 summary 2a19 SPE A
Switch Name: Date: 1:25 pm THU APR 16, 1992
DS-1 Link Performance Measurements Summary Report
Counted Since: 1:20 pm THU APR 16, 1992
Number of Seconds Elapsed Into Current 15-min Interval: 323
Total of Valid 15-min Intervals in Past 24-hr Period: 0
Total of Current
Worst_15-Min_Interval 24-hr 15-Min Interval
Category Date Time Count Count Count
Errored Seconds 4/16 13:20 0 0 4
Bursty Err Secs 4/16 13:20 0 0 4
Severely Err Secs 4/16 13:20 0 0 0
Failed Seconds 4/16 13:20 0 0 0
Command successfully completed