Avaya Definity SI - Test Analog-Testcall

test analog-testcall
Issue 4 May 2002
A-115 555-233-123
test analog-testcall
Help Messages
If the system technician presses HELP after entering “test analog-testcall” a
message showing the following keywords appears:
trunk board port
If the system technician presses HELP after entering “test analog-testcall trunk,”
the following message appears:
Enter group number or group number/member number,
[’full’ or ’supervision’ or ’no-selftest’
or ’no-return-loss’ or ’no-st-or-rl’],
[’repeat 1-100’], [’schedule’]
If the system technician presses HELP after entering “test analog-testcall port” the
following message appears:
Enter trunk port number [’full’ or ’supervision’
or ’no-selftest’ or ’no-return-loss’
or ’no-st-or-rl’], [’repeat 1-100’], [’schedule’]
If the system technician presses HELP after entering “test analog-testcall board”
the following message appears:
Enter trunk board number, [’full’ or ’supervision’
or ’no-selftest’ or ’no-return-loss’
or ’no-st-or-rl’], [’repeat 1-100’], [’schedule’]
Error Messages
If the format for the trunk location is incorrect, the following message displays:
Format invalid
Port Network: "Port Network invalid"
Board Number: "Invalid entry"
Port: "Port invalid"
Category: “”xxxxxxxx” is an invalid entry; please press HELP”
Extension: “Entry must be all digits”
“Extension not assigned”
Trunk (group) “Entry must be all digits”
“Group not assigned, or group assigned but with no member”
Trunk (member) “Entry must be all digits”
“Number invalid”
“Group member not assigned”
“Trunk or trunk group invalid”