Error Messages from Chapter 8: Maintenance
Commands
555-233-123
A-116 Issue 4 May 2002
If the trunk group or member range is invalid, the following message displays:
Trunk or trunk group invalid
If the board is not inserted, the following message appears:
Board not inserted
If the specified board does not have any maintenance objects associated with it,
the following message appears:
No MO in this board
If the EPN on which the board resides is not available, the following message
appears:
EPN is not available
If there is a software communication problem, the following message displays:
Error encountered, can’t complete request
If the trunk group is not administered, the following message displays:
Group not assigned, or group
assigned but with no member
If the trunk group member is not administered, the following message displays:
Group member not assigned
If no tests can be found for the associated MO, the following message appears:
No tests for this MO
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
If the format for the board or port location is incorrect, the following message
displays:
Port/Board invalid
To Next Page
Loading...
