Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-276 Issue 4 May 2002
reset system 3
This command has been modified to require an additional parameter, but only if
the reset level is 3. The reset system 3 command includes the periodic
synchronization of translations in a ATM WAN spare processor (WSP). When you
issue this command, you must indicate whether you want to preserve the license
or not:
■ reset system 3 preserve-license—the License File information is retained
in memory and is NOT overwritten with the License File on the translation
media.
Use this command when you are uploading translations to a WSP to
synchronize with the PPN translations. The preserve-license qualifier
— Prevents the PPN License File with the wrong serial number from
overwriting the WSP License File.
— Preserves the WSP product ID.
■ reset system 3 no-preserve-license—the License File in memory IS
overwritten with the License File on the translation media.
— Use this command when you are uploading translations to a WSP
so they are synchronized with the PPN. The license from the PPN
does not overwrite the license on the WSP or SREPN.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
reset
system 3
preserve-license
no-preserve-license
Resets system, reads translations,
and preserves the license
information and product ID.
Resets system, reads translations,
does not preserve the license
information and product ID.
To Next Page
Loading...
