test sp-link
Issue 4 May 2002
8-481555-233-123
test sp-link
The test sp-link command validates that the system printer link is administered
and runs a series of diagnostic tests that return results of the test along with
possible error codes.
The system printer link is a link from the switch to an external printer over which
jobs can be printed. This link is created by administering the system printer
extension and setting up a call to the system printer.
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test sp-link short
long
schedule
Option for a brief series of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive series of both
destructive and nondestructive
diagnostic tests.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
test sp-link
test sp-link sh
test sp-link l
test sp-link schedule
test sp-link sh sch
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
short none
To Next Page
Loading...
