Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-480 Issue 4 May 2002
Feature Interactions
Additional data is available after running a test. See the status signaling-group
command for how to access the additional data.
Output
The following output example is for the test signaling-group 1 command. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
The signaling group number (1-8) of the signaling group that
is being tested.
Maintenance
Name
The type of maintenance object that is being tested.
Alt. Name
Not Applicable.
Test No
Test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each
MO.
test signaling-group 1 SPE A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
1 ISDN-SGR 636 PASS
1 ISDN-SGR 639 PASS
1 ISDN-SGR 637 PASS
Command Successfully Completed
To Next Page
Loading...
