reset translation-id
Issue 4 May 2002
8-277555-233-123
reset translation-id
This command resets the translation-ID on the translation card(s) to match the
processor(s), saves translations to the memory card, and restores use of the add,
change, remove, and duplicate commands.
NOTE:
This command can be executed only by Avaya Services.
Error message
In duplicated systems, the message,
Cannot reset translation-ID without standby SPE being
accessible
means that both processors must be sane and operational.
■ A standby SPE that has been busied out must be released (release
standby-spe).
■ Check that the SPE-select switches on the DUPINT circuit pack are in the
AUTO position.
reset val
This command performs the functions of the reset board command but overrides
querying the board to determine if an announcement autosave is in process. This
allows resetting the circuit pack if it is in the insane state.
Screen 8-25. Reset VAL report
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
reset
translation-id
Example:
reset translation-id
Avaya Services only See ‘‘Error
message’’
reset val 1C07
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C07 VAL-BD 53 PASS
To Next Page
Loading...
