Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-382 Issue 4 May 2002
status psa
See ‘‘status tti’’.
status signaling-group
This command displays the state, type, port location, and state of the Primary and
Secondary D-channels within the group. A signaling group is a collection of
B-channels signaled for by a designated single D-channel or set of D-channels
over an ISDN-PRI.
Output
The following output example shows the output from the status
signaling-group 1 command.
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status
signaling-
group
group
identifier
print
Administered group identifier
number (1-8)
Report sent to printer
Examples:
status signaling-group 1
status signaling-group 2 print
init
inads
craft
cust
browse
none none
status signaling-group 1 Page 1 of 1 SPE A
STATUS SIGNALING-GROUP
Group ID: 1
Type: facility associated signaling
Group State: in-service
Primary D-Channel
Link: 1 Port: 01C1924 Level 3 State: in-service
Secondary D-Channel
Link: Port: Level 3 State:
To Next Page
Loading...
