status processor-channel
Issue 4 May 2002
8-381555-233-123
Output
The following example shows the output from the status processor-channels 1
command.
Field descriptions
Channel Number
The processor channel number 1-64.
Channel Status
Displays the state the session layer protocol is in. The
following describes the various session layer states:
■ Channel is not administered.
■ Channel is in a state entering “wait session accept”
(WSA).
■ Channel is in a state waiting for a “session accept”
message from the far end.
■ Channel is in data transfer state (channel is up and
running).
■ Channel is in resynchronization state.
■ Channel is waiting for acknowledgment of disconnect
message.
Channel Number
The processor channel number 1-64.
Link Type X.25, Ethernet, or PPP
PROCESSOR CHANNEL STATUS
Channel Number: 1
Channel Status: Administered but not connected
Link Number: 3
Link Type: BX.25
Message Buffer Number: 0
Reset Count: 0
Retransmission Count: 0
To Next Page
Loading...
