Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-496 Issue 4 May 2002
Field descriptions
traceroute
This command provides the ability to trace the route of C-LAN-originated packets
through the LAN. The output shows the ip address of each router or host (hop)
that the packets encounter and the time elapsed between each hop. If C-LAN has
trouble communicating with a far-end device, the traceroute command can
determine “how far” packets get toward the destination.
DEFINITY IP boards include:
■ TN799B (or later suffix) CLAN board
■ TN802B Medpro board
■ TN2302 IP Medpro board
The form lists
■ Hops traversed from source to destination
■ IP addresses of the hop points and the final destination
■ Observed round-trip delay from the source to each hop point
If no reply is received from a potential hop point, the IP Address field contains
blanks.
The primary use of this command is to determine quickly and unambiguously if
the fault lies within Avaya-provided equipment or if the fault is with the LAN or
LAN administration to which the Avaya DEFINITY Server switch is connected.
Port
Port address of the administered temporary signaling
connection (format = signaling group no./tsc index)
Maintenance
Name
The name of the maintenance object
Alt. Name
Not applicable
Test No.
The test number being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, or Extra
Bd.
Error Code
A system-generated number indicating the reason that the
test for the named MO failed or aborted.
To Next Page
Loading...
