busyout station
Issue 4 May 2002
8-19555-233-123
Output
The following example is a display of the busyout spe-standby command.
Field descriptions
busyout station
This command places the installed and uninstalled administered voice terminal
extension (station) in a maintenance busy state. No periodic or scheduled tests
are performed on the busied out station until it is released. When the object is
maintenance busy it is deactivated (no call processing activity can include the
busied object). Warning alarms (error type 18) are generated on each busied out
maintenance object, so that INADS can determine the state of the objects. The
command, release station, reactivates the specified voice terminal extension.
Port
Standby SPE cabinet and carrier location (01A or 01B)
Maintenance
Name
Always STBY-SPE
Alt. Name
Blank
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each MO.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
busyout
station
extension Extension number (per
dial-plan)
Examples:
busyout station 10020
busyout station 32770
init
inads
craft
none none
busyout spe-standby SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01B STBY-SPE PASS
Command successfully completed
To Next Page
Loading...
