status ip-network-region
Issue 4 May 2002
8-369555-233-123
status ip-network-region
status ip-network-region
The status ip-network-region x (where x is between 1 to 250 for r and 80 for
si/csi/d) will provide the status of the administered inter-network region connection
management based on the background maintenance ping test. If the background
maintenance test concluded a failed connectivity between two regions x and y,
then the matrix for status ip-network-region x, or status ip-network-region y will
indicate the result as “f” (failed) between those two regions.
Output
The following example shows the output for the status network-region 2
command.
Field descriptions
_
Not administered.
f Failed (based on background maintenance ping test result).
“1” to “7” Passed (represents the preferred codec to be used between the
two regions and implied meaning that inter-network region
connectivity exists between these two regions).
status ip-network-region 2
Inter Network Region Connection Management
Region (Group Of 32)
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
001-032 1
033-064
065-080
Command:
To Next Page
Loading...
