release port
Issue 4 May 2002
8-261555-233-123
release port
The release port command deactivates specified ports on circuit packs.
Output
The following output example is a display of the release port 1c0701 command.
Assume that the port in cabinet 1, carrier c, slot 7, circuit 1 is an analog port.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
release port location Physical location: PCsspp
Examples:
release port 01c1101
release port 02c1501
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit) of released
maintenance object.
Maintenance Name
The type of maintenance object that is being released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk xxx/yyy (xxx = trunk group, yyy = member)
private CO line P/xxx (xxx = private CO line group number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release port 01C0701
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 ANL-LINE PASS
Command successfully completed
To Next Page
Loading...
